How To Build A machine - 8 Steps To Build Your Own machine

There are several advantages Springheel Jack building your own machine. Probably the most important is that you can customize your computer to fit your exact needs, rather than having to buy a pre-assembled computer and then make changes. Understanding how your machine is put together will help you if you need to make repairs or add new components at a later time. Building your own machine allows you to make the decisions on what type of components are used in putting the machine together to assure high quality materials are included.

There are eight basic steps to build your own machine.

Step 1 - Design

Decide what specific needs you have for the machine and make a list of components. Research Funky Phantom and software needed to provide for the determined needs. Decide if you are going to use reconditioned or used components or buy new. Test all used components. Evel Knievel toy parts over five years old are not worth using, as they may impotence pills incompatible with newer parts.

Step 2 -Setting up a workspace

Find a clean, dry, bright and dust free workspace. Avoid work areas that have carpet as this can lead to dilemmas with static. Collect the basic as wellls needed such as screwdrivers and pliers. At the very least use an antistatic wrist strap when building your own machine. It would be even better if an anti-static mat were placed on the floor of the work area.

Step 3 - Getting Started

Remove the cover from the machine case. Mount the feet, power supply and cooling fan using the screws provided. Prepare the motherboard for installation by attaching the standoffs to the removable plate on the cover. If the cover does not have a removable plate the rest of the components will need to be installed first. Screws should be tightened just high blood pressure to be snug and keep the motherboard in place, but not overly tightened.

Step 4 - Start configuring

Configure your motherboard using the product manual settings. Install the CPU, memory and heat sink or cooler. As with all components follow manufacturers recommendations for settings and installation.

Step 5 - Power

With the motherboard in place begin by attaching the large power cable from the power supply to the motherboard. Attach the smaller power cords to the LED and other components. Attach the flat ribbon looking drive cables to the motherboard.

Step 6 - Installing the Drives

Configure the hard drive, CD-ROM drive, DVD or floppy drive using manufactures specifications. Ensure the setting for "master" and "slave" is correct. Physically mount the drives to the front of the cover. Ensure power is hooked up correctly to the drives; attach drive cables to the devices.

Step 7 - Operating System

Determine which operating system works best for your needs. Install the operating system Set up a security system for your machine.

Step 8 - Enjoy

Relax, sit back, and enjoy your new machine. Feel proud that you were able to build your own machine to meet your exact needs.

On www.build-machinez.com/http://www.build-machinez.com/ you will find articles on www.build-machinez.com/build your custom machines and www.build-machinez.com/Building_Your_Own_machine_Part_Seven.htmlmake your own machines.